With the rapid advancement of urban air mobility and electrified aviation, electric vertical take-off and landing (eVTOL) aircraft have emerged as transformative solutions for future transportation. Their propulsion and power management systems, serving as the core of energy conversion and control, directly determine overall flight performance, efficiency, weight, and operational safety. The power MOSFET, as a key switching component in these systems, significantly impacts power density, thermal management, electromagnetic compatibility, and longevity through its selection. Addressing the high-power, high-reliability, and weight-sensitive demands of eVTOL applications, this article proposes a complete, actionable power MOSFET selection and design implementation plan with a scenario-oriented and systematic approach.

I. Overall Selection Principles: System Compatibility and Balanced Design

The selection of power MOSFETs should not pursue superiority in a single parameter but achieve a balance among voltage rating, current handling, switching loss, package size, and reliability to precisely match stringent aviation requirements.

Voltage and Current Margin Design

Based on typical high-voltage bus systems (e.g., 400V–800V), select MOSFETs with a voltage rating margin of ≥50% to handle switching spikes, regenerative braking back-EMF, and transient surges. Ensure continuous and peak current ratings exceed load demands by 40–50% for safe operation under dynamic flight conditions.

Low Loss Priority

Losses directly affect efficiency, thermal load, and flight endurance. Conduction loss is proportional to on-resistance (Rds(on)); thus, devices with lower Rds(on) are preferred. Switching loss relates to gate charge (Q_g) and output capacitance (Coss). Low Q_g and Coss enable higher switching frequencies, reduce dynamic losses, and improve EMC.

Package and Thermal Coordination

Select packages based on power density, weight constraints, and cooling methods. High-power stages require low-thermal-resistance packages with minimal parasitic inductance (e.g., TO220, TO220F). Compact modules benefit from space-saving packages (e.g., SOP8, DFN). PCB copper pours, thermal vias, and forced air/liquid cooling must be integrated into layout design.

Reliability and Environmental Robustness

eVTOL operates under varying temperatures, vibrations, and altitudes. Focus on junction temperature range, avalanche energy rating, surge immunity, and long-term parameter stability to ensure compliance with aerospace standards.

图1: 高端广告宣传 eVTOL方案与适用功率器件型号分析推荐VBA3860与VBM1310与VBM17R07产品应用拓扑图_en_01_total

II. Scenario-Specific MOSFET Selection Strategies

eVTOL power systems can be categorized into three main loads: propulsion motor drive, flight control actuation, and power distribution management. Each requires targeted MOSFET selection.

Scenario 1: High-Voltage Propulsion Motor Drive (20kW–100kW per phase)

The propulsion motor is the core power unit, demanding high voltage, efficiency, and reliability for lift and cruise.

Recommended Model: VBM17R07 (Single-N, 700V, 7A, TO220, Planar)

Parameter Advantages:

- High voltage rating (700V) provides ample margin for 400V–600V bus systems, handling transients and back-EMF.

- Planar technology offers robust avalanche capability and stable switching characteristics.

- TO220 package facilitates easy mounting on heatsinks with low thermal resistance.

Scenario Value:

- Enables efficient high-voltage motor drive with reduced component count in series configurations.

- Supports high-frequency switching (up to 50 kHz) for precise motor control, enhancing torque response and noise reduction.

Design Notes:

- Use dedicated high-current gate drivers (≥2 A) to minimize switching losses.

- Implement parallel devices for higher current needs, ensuring current sharing with symmetric layout.

Scenario 2: Flight Control Actuation Systems (Servos, Auxiliary Motors)

图2: 高端广告宣传 eVTOL方案与适用功率器件型号分析推荐VBA3860与VBM1310与VBM17R07产品应用拓扑图_en_02_propulsion

Actuation systems require compact, fast-response MOSFETs for precise control of flaps, rudders, and landing gear, with emphasis on integration and reliability.

Recommended Model: VBA3860 (Dual-N+N, 80V, 3.5A per channel, SOP8, Trench)

Parameter Advantages:

- Dual N-channel integration saves board space and simplifies half-bridge or independent switching designs.

- Low Rds(on) (62 mΩ @10V) minimizes conduction loss in compact spaces.

- Trench technology provides low gate charge for fast switching and direct MCU drive compatibility.

Scenario Value:

- Ideal for compact motor drivers in distributed flight control modules, reducing wiring weight and improving response.

- Enables redundant control paths for safety-critical actuation.

Design Notes:

- Add gate resistors (10–47 Ω) to suppress ringing in high-frequency PWM applications.

- Ensure thermal vias under the SOP8 package for heat dissipation to the PCB interior layers.

Scenario 3: Power Distribution and Battery Management (High-Current Switching)

Power distribution units manage high currents from batteries to subsystems, requiring low-loss switches for efficiency and thermal management.

Recommended Model: VBM1310 (Single-N, 30V, 80A, TO220, Trench)

Parameter Advantages:

- Extremely low Rds(on) (6 mΩ @10V) reduces conduction loss to negligible levels, maximizing energy efficiency.

图3: 高端广告宣传 eVTOL方案与适用功率器件型号分析推荐VBA3860与VBM1310与VBM17R07产品应用拓扑图_en_03_actuation

- High current rating (80A) suits main power path switching or battery protection circuits.

- Trench technology ensures low thermal resistance and high power density.

Scenario Value:

- Enables efficient power routing for avionics, lighting, and sensors, minimizing voltage drop and heat generation.

- Supports high-current solid-state circuit breakers for enhanced safety and fast fault isolation.

Design Notes:

- Employ thick copper traces or busbars to handle high currents without overheating.

- Integrate temperature sensors and overcurrent protection for autonomous thermal management.

III. Key Implementation Points for System Design

Drive Circuit Optimization

- High-Voltage MOSFETs (e.g., VBM17R07): Use isolated gate drivers with high noise immunity and negative voltage clamping to prevent false triggering.

- Compact Dual MOSFETs (e.g., VBA3860): Ensure separate gate drives with RC filters to avoid cross-talk in dual-channel operation.

- High-Current MOSFETs (e.g., VBM1310): Implement strong gate drive (≥3 A) to reduce switch-on time, supplemented with snubber circuits for inductive loads.

Thermal Management Design

- Tiered Approach: High-power MOSFETs (TO220 packages) mount on actively cooled heatsinks; medium-power devices use PCB copper pours with thermal vias; low-power SOP8 devices rely on natural convection.

- Environmental Derating: In high-altitude or high-temperature conditions, derate current usage by 20–30% based on junction temperature limits.

EMC and Reliability Enhancement

- Noise Suppression: Place RC snubbers across drain-source terminals and use ferrite beads on gate lines to dampen oscillations.

- Protection Design: Incorporate TVS diodes at gate inputs for ESD protection, varistors for surge suppression, and current-sensing with fast shutdown for overcurrent events.

- Redundancy: Design parallel MOSFET paths with monitoring for critical systems to ensure fail-operative capability.

IV. Solution Value and Expansion Recommendations

Core Value

- High-Efficiency Propulsion: Combination of high-voltage and low-Rds(on) devices achieves system efficiencies >97%, extending flight range and reducing thermal load.

- Lightweight Integration: Compact and dual packages reduce overall weight and volume, enabling more payload or battery capacity.

- Aviation-Grade Reliability: Margin design, robust thermal management, and protection circuits meet stringent safety standards for continuous operation.

Optimization and Adjustment Recommendations

- Power Scaling: For propulsion systems >100kW, consider parallel configurations of VBM17R07 or higher-current modules (e.g., 1200V class).

- Integration Upgrade: For higher density, use power modules or IPMs that integrate MOSFETs with drivers and protection.

- Special Environments: For extreme conditions, select automotive or aerospace-grade variants with enhanced coating and wider temperature ranges.

- Advanced Control: For precision motor drives, combine MOSFETs with SiC gate drivers or digital controllers for optimized switching.

The selection of power MOSFETs is critical in designing power systems for eVTOL aircraft. The scenario-based selection and systematic methodology proposed here aim to achieve the optimal balance among performance, weight, safety, and reliability. As technology evolves, future exploration may include wide-bandgap devices like SiC or GaN for higher frequency and efficiency, paving the way for next-generation aviation innovation. In the era of urban air mobility, excellent hardware design remains the cornerstone of superior flight performance and passenger trust.

图4: 高端广告宣传 eVTOL方案与适用功率器件型号分析推荐VBA3860与VBM1310与VBM17R07产品应用拓扑图_en_04_powerdist