With the advancement of robotic-assisted surgery and intelligent rehabilitation, AI-integrated surgical and rehabilitation robots have become pivotal equipment for enhancing surgical outcomes and patient recovery. The power management and motor drive systems, serving as the "nerves and muscles" of the entire robot, provide stable, efficient, and precise power conversion and motion control for critical loads such as multi-axis robotic arms, servo actuators, and various sensors. The selection of power MOSFETs/IGBTs directly determines system precision, dynamic response, power density, and, most critically, operational safety and reliability. Addressing the extreme demands of medical robotics for safety, precision, efficiency, and miniaturization, this article focuses on scenario-based adaptation to develop a practical and optimized power device selection strategy.

I. Core Selection Principles and Scenario Adaptation Logic

(A) Core Selection Principles: Multi-Dimensional Co-Design

Device selection requires a holistic co-design across electrical, thermal, integration, and reliability dimensions, ensuring a perfect match with the robot's stringent operating conditions:

Voltage & Safety Margin: For servo drives (24V/48V/72V) and main power rails, reserve a rated voltage withstand margin of ≥60-80% to handle regenerative braking spikes and ensure isolation safety. Prioritize devices with sufficient voltage ratings and robust gate protection.

Prioritize Ultra-Low Loss & Precision: Prioritize devices with extremely low Rds(on) (minimizing conduction loss and I²R heating) and optimized switching characteristics (low Qg, Qgd) to enhance efficiency, reduce thermal noise, and enable high-bandwidth, precise current control crucial for motion accuracy.

Package & Integration Matching: Choose low-inductance, thermally efficient packages (e.g., TO-263, TO-247, DFN) for high-power servo drives. Select compact, integrated packages (e.g., Dual MOSFETs in DFN) for auxiliary actuators and power distribution, balancing power density and signal integrity in constrained spaces.

Medical-Grade Reliability & Ruggedness: Exceed standard durability requirements. Focus on wide junction temperature range, high avalanche energy rating, exceptional thermal stability, and gate oxide robustness to ensure fail-safe operation in life-critical applications and over long duty cycles.

(B) Scenario Adaptation Logic: Categorization by Functional Criticality

图1: AI手术与康复一体化机器人方案与适用功率器件型号分析推荐VBGL2405与VBQA3615与VBQF3316与VBL17R11SE与VBMB1603产品应用拓扑图_en_01_total

Divide loads into three core scenarios: First, High-Precision Servo/Joint Drive (motion core), requiring high current, ultra-low loss, and excellent dynamic response. Second, Centralized Power Distribution & Protection (system backbone), requiring intelligent high-side switching, fault isolation, and low quiescent loss. Third, Auxiliary Actuator & Sensor Drive (functional modules), requiring compact integration, good thermal performance, and multi-channel control capability. This enables precise parameter-to-need matching.

II. Detailed Device Selection Scheme by Scenario

(A) Scenario 1: High-Precision Servo/Joint Drive (200W-1000W+) – Motion Core Device

Robotic arm joints and high-torque actuators demand handling large continuous and peak currents (e.g., for acceleration/deceleration) with minimal loss to ensure precision, efficiency, and low thermal drift.

Recommended Model: VBMB1603 (Single-N, 60V, 210A, TO-220F)

Parameter Advantages: Advanced Trench technology achieves an ultra-low Rds(on) of 2.6mΩ at 10V. Extremely high continuous current of 210A (with appropriate cooling) handles demanding servo applications. TO-220F package offers excellent thermal resistance for direct heatsink mounting.

Adaptation Value: Drastically reduces conduction loss. For a 48V/500W joint motor (~10.4A RMS), single device conduction loss is remarkably low (~0.28W), enabling drive efficiency >97%. Low loss minimizes heat generation, reducing thermal distortion and allowing for higher control bandwidth and positional accuracy.

Selection Notes: Must verify worst-case motor stall current and regenerative voltage spikes. Requires robust gate driver (≥2A peak) and meticulous layout to minimize parasitic inductance. Essential to implement comprehensive overcurrent, overtemperature, and short-circuit protection.

(B) Scenario 2: Centralized Power Distribution & Safety Isolation – System Backbone Device

Main power rails (e.g., 24V, 48V) feeding various subsystems require intelligent high-side switches for power sequencing, fault isolation, and low standby power consumption.

Recommended Model: VBGL2405 (Single-P, -40V, -80A, TO-263)

Parameter Advantages: P-Channel configuration simplifies high-side drive circuitry. Low Rds(on) of 5.6mΩ at 10V minimizes voltage drop and power loss on the main bus. High current rating (-80A) allows it to control a large power branch or multiple sub-modules. TO-263 package balances power handling and board space.

Adaptation Value: Enables safe power-up/power-down sequencing for different robot segments (e.g., arm before end-effector). Provides immediate fault isolation (e.g., in case of a short circuit in a peripheral module) to protect the core system. Low on-resistance ensures minimal impact on overall system efficiency.

图2: AI手术与康复一体化机器人方案与适用功率器件型号分析推荐VBGL2405与VBQA3615与VBQF3316与VBL17R11SE与VBMB1603产品应用拓扑图_en_02_servo

Selection Notes: Gate drive requires a level-shifter or charge pump circuit. Ensure voltage margin for the bus (e.g., use -40V device for 24V bus). Implement current monitoring on the switched branch for fault detection.

(C) Scenario 3: Auxiliary Actuator & Multi-Channel Sensor Drive – Functional Integration Device

Gripper motors, pump controls, or clusters of sensors/valves require compact, multi-channel drivers to save space and simplify PCB layout.

Recommended Model: VBQA3615 (Dual-N+N, 60V, 40A per channel, DFN8(5x6))

Parameter Advantages: Integrated dual N-MOSFETs in a single DFN8 package save over 40% PCB area compared to two discrete devices. 60V rating is suitable for 24V/48V auxiliary systems. Low Rds(on) of 11mΩ at 10V per channel ensures efficient operation. Common-source configuration offers design flexibility.

Adaptation Value: Ideal for driving two independent small actuators (e.g., surgical tool manipulators) or for constructing a compact synchronous buck converter for local voltage regulation. High integration supports modular robot design.

Selection Notes: Pay attention to package thermal resistance; ensure adequate copper pour for both channels. Gate drive signals must be independent for separate control. Verify total power dissipation within package limits.

III. System-Level Design Implementation Points

(A) Drive Circuit Design: Optimized for Precision and Speed

VBMB1603: Pair with high-performance, isolated gate driver ICs (e.g., Si823x, ISO5852S) featuring high current capability (≥4A peak) and fast switching to fully utilize its low-loss potential. Use Kelvin source connection if available.

VBGL2405: Use a dedicated high-side driver or a simple NPN/PMOS level-shifter circuit. Include a strong pull-down resistor on the gate to ensure fast, definite turn-off.

VBQA3615: Can be driven directly by MCU PWM outputs through gate resistors if switching frequency is moderate. For higher frequencies, use dual-channel gate drivers. Isolate gate drive loops for each channel to prevent crosstalk.

(B) Thermal Management Design: Mission-Critical for Stability

VBMB1603 (TO-220F): Mandatory use of an isolated thermal pad and mounting to a dedicated heatsink or the robot's internal thermally managed chassis. Consider forced air cooling for high-power joints.

VBGL2405 (TO-263): Requires a significant copper pour (≥300mm²) on the PCB with multiple thermal vias to an internal ground plane or heatsink layer.

VBQA3615 (DFN8): Requires a symmetrical, exposed pad copper pour (as per datasheet) with abundant thermal vias to dissipate heat from both dies effectively.

图3: AI手术与康复一体化机器人方案与适用功率器件型号分析推荐VBGL2405与VBQA3615与VBQF3316与VBL17R11SE与VBMB1603产品应用拓扑图_en_03_distribution

System-Level: Implement temperature monitoring (NTC or via driver IC) on all key power devices. Thermal derating must be applied for ambient temperatures above 50°C.

(C) EMC & Reliability Assurance for Medical Environments

EMC Suppression:

Place low-ESR ceramic capacitors (100nF to 1µF) very close to the drain-source of all switching devices.

Use ferrite beads on gate drive paths and sensor lines entering/leaving motor drive zones.

Implement strict PCB zoning: separate high-power motor loops, digital control, and sensitive analog/sensor areas.

Reliability Protection:

Derating: Apply stringent derating rules (e.g., VDS ≤ 70% of rating, ID ≤ 50-60% of rating at max operating temperature).

Fault Protection: Implement redundant checks: hardware overcurrent (shunt + comparator), software current limiting, driver IC desaturation detection (for VBMB1603 in half-bridge), and overtemperature shutdown.

Isolation & Surge Protection: Use isolated gate drivers. Place TVS diodes (e.g., SMBJ series) on all power inputs/outputs and on the gate-source of critical devices (VBGL2405) for ESD/surge immunity.

IV. Scheme Core Value and Optimization Suggestions

(A) Core Value

Enables Precision and Dynamic Performance: Ultra-low loss devices like VBMB1603 minimize thermal effects and allow faster current loop control, directly translating to higher robotic accuracy and smoother motion.

Ensures System-Level Safety and Availability: The combination of VBGL2405 for robust power management and comprehensive protection strategies creates a fault-tolerant architecture, critical for surgical applications.

图4: AI手术与康复一体化机器人方案与适用功率器件型号分析推荐VBGL2405与VBQA3615与VBQF3316与VBL17R11SE与VBMB1603产品应用拓扑图_en_04_auxiliary

Optimizes Power Density and Modularity: The use of highly integrated devices like VBQA3615 saves valuable space, enabling more compact joint designs or additional functional modules within the same footprint.

(B) Optimization Suggestions

Higher Power/Voltage Joints: For robots using 72V+ bus voltages or higher power actuators, consider VBL17R11SE (700V, 11A, SJ) for the PFC stage or higher voltage bridge legs.

Extreme Miniaturization: For very compact modules (e.g., in robotic end-effectors), replace VBQA3615 with VBQF3316 (30V, 26A, DFN8(3x3)) for lower power auxiliary functions.

Enhanced Safety Certification: For robots targeting the most stringent medical safety standards, seek devices with relevant certifications or characterized for medical use cases.

Intelligent Power Stages: Future designs should explore integrated power modules (IPMs) or motor driver ICs with embedded MOSFETs and protection for further simplification and reliability.

Conclusion

Power semiconductor selection is central to achieving the unparalleled reliability, precision, and safety demanded by AI surgical and rehabilitation robots. This scenario-based scheme, leveraging devices like VBMB1603, VBGL2405, and VBQA3615, provides a foundational technical guide for R&D through precise load matching and rigorous system-level design. Future exploration into wide-bandgap (SiC, GaN) devices and smart integrated motor drives will further push the boundaries of performance, aiding in the development of the next generation of life-enhancing and life-saving robotic systems.