With the advancement of industrial intelligence and the stringent safety demands in hazardous environments, explosion-proof collaborative robots have become crucial equipment in sectors such as petrochemicals, mining, and chemical manufacturing. The power management and motor drive systems, acting as the "power source and motion actuators" of the robot, provide precise power conversion and control for key loads including joint motors, safety control circuits, and onboard sensors. The selection of power MOSFETs directly determines the system's operational safety, motion precision, efficiency, and reliability in harsh conditions. Addressing the core requirements of explosion-proof robots for intrinsic safety, high torque density, low heat generation, and robust protection, this article develops a practical and optimized MOSFET selection strategy based on scenario-specific adaptation.

I. Core Selection Principles and Scenario Adaptation Logic

(A) Core Selection Principles: Four-Dimensional Collaborative Adaptation

MOSFET selection requires coordinated adaptation across four dimensions—voltage, loss, package, and reliability—ensuring precise matching with the demanding operating conditions of explosion-proof environments:

Sufficient Voltage Margin & Robustness: For power buses (e.g., 48V, 72V, or higher DC links), reserve a rated voltage withstand margin of ≥60% to handle regenerative braking spikes, cable inductance, and grid transients. Prioritize devices with high VDS ratings and rugged gate structures (e.g., ±30V VGS).

Prioritize Ultra-Low Loss for Efficiency & Thermal Management: Prioritize devices with extremely low Rds(on) (minimizing conduction loss in high-current paths) and optimized gate charge (Qg)/output capacitance (Coss) (reducing switching loss), adapting to continuous duty cycles, improving overall energy efficiency, and critically minimizing heat generation within explosion-proof enclosures.

图1: 防爆协作机器人方案与适用功率器件型号分析推荐VBP18R47S与VBGED1601与VBMB1101N与VBQG2216与VBM16R20S与VBM1401与VBN2625与VBE1615产品应用拓扑图_en_01_total

Package Matching for Power Density & Heat Dissipation: Choose packages with excellent thermal performance (e.g., TO247, LFPAK56) for high-power joint motor drives. Select compact, robust packages (e.g., TO220, TO252, DFN) for auxiliary power and safety control circuits, balancing power density, mechanical strength, and thermal interface design.

Reliability & Ruggedness for Harsh Environments: Exceed standard industrial durability requirements. Focus on wide junction temperature range (e.g., -55°C ~ 175°C), high avalanche energy rating, superior thermal stability, and resistance to vibration and contamination, ensuring adaptation to volatile atmospheres and demanding duty cycles.

(B) Scenario Adaptation Logic: Categorization by Robot Subsystem

Divide loads into three core operational scenarios: First, Joint Motor Drive (High-Power Motion Core), requiring very high continuous/pulsed current, high efficiency, and precise control for dynamic movement. Second, Central Power Management & Distribution (System Power Hub), requiring high-voltage blocking capability, robust surge handling, and efficient power routing. Third, Safety & Control Module (Critical Protection), requiring fast response, reliable switching for safety interlocks, brake control, and sensor power management, ensuring functional safety (SIL/PL).

II. Detailed MOSFET Selection Scheme by Scenario

(A) Scenario 1: Joint Motor Drive (1kW-5kW per joint) – High-Power Motion Core Device

Robot joint motors (typically BLDC/PMSM) require handling high phase currents (tens to hundreds of Amps) and frequent current peaks during acceleration/deceleration, demanding ultra-low loss to minimize heat build-up inside the sealed enclosure.

Recommended Model: VBGED1601 (Single-N, 60V, 270A, LFPAK56)

Parameter Advantages: Advanced SGT technology achieves an ultra-low Rds(on) of 1.2mΩ at 10V VGS. Exceptional continuous current rating of 270A (with high pulse capability) suits common 48V/72V robot drive buses. LFPAK56 (Power-SO8) package offers very low thermal resistance (RthJC typ. <0.5°C/W) and low parasitic inductance, enabling superior heat transfer to chassis/chiller and high-frequency, low-loss switching.

Adaptation Value: Drastically reduces conduction loss. For a 48V/2kW joint motor (~42A RMS phase current), per-device conduction loss can be below 2.1W, contributing to drive efficiency >98%. Low switching loss supports high PWM frequencies (20-50kHz) for smooth, quiet motor operation and precise torque control, essential for collaborative sensitivity.

Selection Notes: Verify motor peak current and regenerative energy. Implement strict derating (e.g., use 2-3 devices in parallel per phase for high-power joints). Ensure excellent PCB thermal design with large copper areas and thermal interface to enclosure/cold plate. Must be paired with robust gate drivers (≥3A source/sink) and motor controllers with comprehensive protection.

(B) Scenario 2: Central Power Management / Braking Unit – High-Voltage Robust Device

This scenario involves main input protection, DC-link management, and braking circuit switching, requiring high voltage blocking to handle bus voltages and surge events, along with good current capability.

Recommended Model: VBP18R47S (Single-N, 800V, 47A, TO247)

Parameter Advantages: Super-Junction (SJ_Multi-EPI) technology provides high voltage rating (800V) with good Rds(on)Area figure of merit. 47A continuous current capability. TO247 package facilitates easy mounting to heatsinks or chassis for high heat dissipation. High VGS rating (±30V) offers robustness against gate noise.

Adaptation Value: Provides a safe margin for 400VAC-rectified (~565VDC) or higher voltage DC bus systems in industrial settings. Can be used in active braking circuits to safely dissipate regenerative energy through resistors. High voltage rating enhances system resilience against line transients.

Selection Notes: Essential for systems connected to higher voltage mains. Ensure avalanche energy rating is sufficient for expected surge events. Gate drive must be designed to minimize switching loss at high voltage. Always used with appropriate snubber circuits and fusing.

(C) Scenario 3: Safety & Control Module / Auxiliary Power Switch – Fast & Reliable Control Device

Safety circuits (e.g., motor brakes, safe torque off-STO outputs), sensor clusters, and communication modules require reliable, fast switching with moderate current, often in space-constrained areas of the control cabinet.

Recommended Model: VBE1615 (Single-N, 60V, 58A, TO252 (DPAK))

Parameter Advantages: Balanced performance with 60V VDS, suitable for 24V/48V control buses. Low Rds(on) of 10mΩ (10V) ensures minimal voltage drop. Moderate gate charge for fast switching. TO252 package offers a good compromise between power handling, board space, and ease of mounting/insulation.

图2: 防爆协作机器人方案与适用功率器件型号分析推荐VBP18R47S与VBGED1601与VBMB1101N与VBQG2216与VBM16R20S与VBM1401与VBN2625与VBE1615产品应用拓扑图_en_02_motor

Adaptation Value: Enables rapid and reliable switching for safety-critical functions like holding brake release (response time <1ms). Can efficiently power multiple sensors and controllers. The robust package is suitable for potentially vibratory environments.

Selection Notes: Select based on the highest continuous current in the control path. For safety circuits, prioritize devices from high-reliability batches. Incorporate redundant switching or monitoring where needed for SIL/PL requirements. Use standard MCU GPIO buffers or small gate drivers for clean switching.

III. System-Level Design Implementation Points

(A) Drive Circuit Design: Matching Device Characteristics

VBGED1601: Pair with high-current, isolated gate driver ICs (e.g., ISO5852S, UCC5350) capable of >4A peak current. Minimize power loop inductance with layered PCB design and adjacent decoupling capacitors. Use gate resistors (2-10Ω) to fine-tune switching speed and damp ringing.

VBP18R47S: Use gate drivers with sufficient voltage isolation and drive strength. Implement RC snubber networks across drain-source to suppress high-voltage ringing. Pay attention to creepage and clearance distances for high-voltage nodes.

VBE1615: Can be driven directly by microcontroller buffers or small gate driver ICs for faster switching. Include a gate-source pull-down resistor (10kΩ) for defined off-state. Add TVS diodes on the gate and load side for ESD and surge protection.

(B) Thermal Management Design: Critical for Explosion-Proof Enclosures

VBGED1601 (High Heat Flux): Primary thermal management focus. Use thick copper PCB (≥2oz) with extensive copper pours and multiple thermal vias under the package. Interface directly to a chilled plate, cold wall, or external heatsink through thermal pad/compound. Monitor junction temperature via NTC or driver IC fault signals.

VBP18R47S: Typically mounted on a dedicated heatsink. Use proper thermal interface material and insulation kits if needed. Ensure heatsink rating accounts for total system losses.

VBE1615: Local PCB copper pour (≥100mm²) is often sufficient. For higher current applications, a small clip-on heatsink or connection to an internal chassis may be needed.

System Level: Design enclosure internal airflow (if forced convection is allowed) or conduction paths to transfer heat to the enclosure walls. Position high-loss components optimally relative to cooling surfaces.

(C) EMC and Reliability Assurance for Hazardous Environments

EMC Suppression:

图3: 防爆协作机器人方案与适用功率器件型号分析推荐VBP18R47S与VBGED1601与VBMB1101N与VBQG2216与VBM16R20S与VBM1401与VBN2625与VBE1615产品应用拓扑图_en_03_power

VBGED1601: Use low-ESR/ESL ceramic capacitors very close to drain-source terminals. Consider common-mode chokes on motor output cables. Implement proper shielding for motor cables.

VBP18R47S: Use input EMI filters compliant with industrial standards. Incorporate ferrite beads on gate drive paths.

Implement strict PCB zoning: separate high-power, high-voltage, and sensitive analog/digital areas. Use grounded shields where necessary.

Reliability & Protection:

Derating Design: Apply conservative derating (e.g., voltage ≤80% of rating, current ≤50-70% at max expected case temperature).

Overcurrent/Overtemperature/Short-Circuit Protection: Mandatory for all motor drives (VBGED1601) using desaturation detection in gate drivers. Implement current sensing (shunt + isolated amplifier/comparator) on all high-power paths.

Surge/Transient Protection: Use TVS diodes or varistors at all power inputs/outputs. Consider RC filters or snubbers for inductive load switching (VBE1615 for brakes).

Redundancy & Monitoring: For safety circuits, design with redundancy principles. Implement periodic self-test of switching elements where applicable.

IV. Scheme Core Value and Optimization Suggestions

(A) Core Value

Enhanced Safety & Reliability in Hazardous Areas: The selected devices, with their high voltage margins, rugged construction, and low thermal stress, directly contribute to the intrinsic safety and operational reliability of the robot in explosive atmospheres.

High Precision & Dynamic Performance: Ultra-low loss MOSFETs (VBGED1601) enable high-efficiency, high-bandwidth motor control, resulting in smooth, precise motion and force control critical for collaborative tasks.

图4: 防爆协作机器人方案与适用功率器件型号分析推荐VBP18R47S与VBGED1601与VBMB1101N与VBQG2216与VBM16R20S与VBM1401与VBN2625与VBE1615产品应用拓扑图_en_04_thermal

Optimized Thermal Design for Sealed Enclosures: By minimizing losses and using thermally efficient packages, the strategy reduces the cooling burden, simplifying the complex thermal management required for explosion-proof certification.

(B) Optimization Suggestions

Power Scaling: For lower-power joints (<1kW), VBM1401 (40V, 280A, TO220) offers a cost-effective alternative in a simpler package. For very high-voltage input systems, VBM16R20S (600V, 20A) can be considered for auxiliary switching.

Space-Constrained Control: For highly dense control boards, VBQG2216 (Single-P, -20V, -10A, DFN6) can be used for high-side switching of low-voltage loads, saving space.

Enhanced Protection: For safety circuits requiring very robust overcurrent capability, VBMB1101N (100V, 90A, TO220F) provides a higher current rating in an isolated package.

High-Side Switching Needs: For 48V-60V high-side control without charge pumps, VBN2625 (Single-P, -60V, -53A, TO262) is an efficient P-channel solution.

Conclusion

Power MOSFET selection is central to achieving the stringent goals of safety, precision, reliability, and thermal performance in explosion-proof collaborative robots. This scenario-based scheme provides comprehensive technical guidance for R&D through precise subsystem matching and robust system-level design. Future exploration can focus on wide-bandgap (SiC) devices for ultra-high efficiency in main drives and integrated intelligent power modules (IPMs) to further enhance power density and reliability, paving the way for the next generation of robust and agile robots for hazardous operations.