As airport electrification accelerates, charging infrastructure for ground support equipment (GSE), electric aircraft tugs, and future electric aircraft demands a new class of power electronics. The power chain within high-end airport charging pile clusters is no longer a simple AC-DC converter; it is the core determinant of grid stability, charging availability, total cost of ownership, and operational safety in a harsh, mission-critical environment. A robustly designed power chain is the physical foundation for achieving fast charging, high-efficiency grid interaction, and 24/7 durability under variable loads and extreme weather conditions.

The challenges are multi-dimensional: How to maximize power density within strict spatial constraints of airport installations? How to ensure absolute reliability and long-term stability of power semiconductors facing continuous thermal cycling and potential grid transients? How to seamlessly integrate advanced grid-support functions, high-voltage safety, and predictive maintenance? The answers reside in the coordinated selection of core power components and their system-level integration.

I. Three Dimensions for Core Power Component Selection: Coordinated Consideration of Voltage, Current, and Topology

1. PFC/High-Voltage DC Link Switch: The Guardian of Grid Interface Efficiency and Stability

Key Device: VBMB18R09SE (800V/9A/TO220F, SJ_Deep-Trench MOSFET)

Voltage Stress Analysis: Modern high-power charging piles utilize 400V or 800V DC bus architectures to minimize current and losses. The 800V VDS rating provides a significant margin for overvoltage spikes from grid disturbances or switching events, ensuring compliance with stringent derating guidelines (operating stress < 70-80% of rating). The TO220F package offers a cost-effective, robust, and industry-standard footprint for high-voltage stages like Power Factor Correction (PFC).

Dynamic Characteristics and Loss Optimization: The Super-Junction Deep-Trench technology delivers an excellent balance between low specific on-resistance (RDS(on)) and low gate charge. The 480mΩ RDS(on) (at 10V VGS) ensures low conduction loss at typical switching frequencies (e.g., 50-100 kHz) used in PFC circuits. Its fast switching capability is crucial for achieving high efficiency across a wide load range and maintaining high power factor.

Thermal Design Relevance: The thermal performance of the TO220F package is well-understood. Mounted on a properly designed heatsink (forced air or liquid-cooled), it effectively manages heat dissipation. Calculating junction temperature rise is critical: Tj = Tc + (I_RMS² × RDS(on) + P_sw) × Rθjc.

2. High-Current DC-DC Primary Side/Output Switch: The Engine of High-Power Conversion

Key Device: VBP1601 (60V/150A/TO247, Trench MOSFET)

Efficiency and Power Density Enhancement: In the DC-DC conversion stage (e.g., isolating a high-voltage DC link to a lower voltage battery bus), minimizing conduction loss is paramount due to very high currents. The VBP1601 features an exceptionally low RDS(on) of 1mΩ (at 10V VGS) and a continuous current rating of 150A. This allows for handling kilowatts of power with minimal voltage drop and associated losses, directly increasing system efficiency and reducing heatsink requirements. The TO-247 package is ideal for managing the high thermal load.

图1: 高端机场充电桩集群方案与适用功率器件型号分析推荐VBGQA1810与VBP1601与VBMB18R09SE产品应用拓扑图_en_01_total

Vehicle/Grid Environment Adaptability: The 60V rating is suitable for many intermediate bus voltages or output stages in high-current paths. Its robust construction handles the thermal stress from constant high-current operation in charging cycles. The low gate threshold voltage (Vth=3V) ensures easy and reliable drive with standard controller ICs.

Drive Circuit Design Points: Requires a dedicated low-impedance gate driver capable of sourcing/sinking high peak currents to swiftly charge/discharge the significant gate capacitance inherent in such a large die. Careful PCB layout with low-inductance power loops is non-negotiable.

3. Auxiliary Power & Intelligent Load Management Switch: The Enabler of High-Density Control

Key Device: VBGQA1810 (80V/58A/DFN8(5x6), SGT MOSFET)

Typical Load Management Logic: Manages power distribution within the charging pile's internal systems: controlling cooling fans, contactors, communication modules, and auxiliary DC-DC converters. Enables sophisticated sequencing and protection. Its high current capability in a tiny package makes it ideal for point-of-load (POL) converters, achieving high power density for control logic and sensor supplies.

PCB Layout and Reliability: The DFN8 package with an exposed thermal pad represents the forefront of power density. With an RDS(on) as low as 9.5mΩ (at 10V VGS), it delivers minimal loss in a minimal footprint. Successful implementation hinges on expert PCB design: a thick, multilayer copper plane connected to the pad via an array of thermal vias is essential for heat dissipation. This allows for compact, highly reliable onboard power management units.

II. System Integration Engineering Implementation

1. Multi-Level Thermal Management Architecture

A hierarchical approach is essential for the dense, high-power stack.

Level 1: Liquid Cooling: Targets the highest power-loss components like the VBP1601 arrays in the main DC-DC converter. Uses a cold plate integrated into the liquid cooling loop of the entire charging station.

Level 2: Forced Air Cooling: Applied to components like the VBMB18R09SE in the PFC stage and magnetics, using dedicated blowers and finned heatsinks within a sealed, filtered air duct to prevent dust ingress.

Level 3: Conduction Cooling: For highly integrated components like the VBGQA1810 on control boards. Relies on thermal vias connecting the DFN pad to large internal ground/power planes, which then conduct heat to the module's metal chassis.

2. Electromagnetic Compatibility (EMC) and Grid Compliance Design

Conducted EMI Suppression: Implement multi-stage filtering at the AC input (PFC stage) and DC links. Use low-ESR film and ceramic capacitors. Employ laminated busbars for all high-di/dt loops involving VBP1601 to minimize parasitic inductance.

Radiated EMI Countermeasures: Fully enclosed metallic cabinet with EMI gaskets. Use shielded cables for all external connections. Implement spread-spectrum clocking for switching regulators where possible.

Grid Safety and Reliability Design: Must comply with relevant standards (e.g., IEC 61851, UL 2202). Implement reinforced isolation between high-voltage and low-voltage sections. Incorporate comprehensive protection: overcurrent, overvoltage, overtemperature, and ground fault detection. Use an Insulation Monitoring Device (IMD) for the DC output.

3. Reliability Enhancement Design

Electrical Stress Protection: Utilize snubber circuits across the VBMB18R09SE to clamp voltage spikes during turn-off. Implement active inrush current limiting for the DC-link capacitors. All inductive loads (contactors, fan motors) require appropriate freewheeling or snubber circuits.

Fault Diagnosis and Predictive Maintenance: Implement hardware-based overcurrent protection with desat detection for IGBTs/MOSFETs. Monitor heatsink temperatures and device case temperatures via NTCs. Advanced systems can trend the RDS(on) of key MOSFETs like the VBP1601 to predict end-of-life and schedule proactive maintenance.

III. Performance Verification and Testing Protocol

图2: 高端机场充电桩集群方案与适用功率器件型号分析推荐VBGQA1810与VBP1601与VBMB18R09SE产品应用拓扑图_en_02_pfc

1. Key Test Items and Standards

System Efficiency Test: Map efficiency across the entire load range (10%-100%) per relevant standards (e.g., ISO 15118, CHAdeMO). Focus on weighted efficiency under typical airport duty cycles.

Environmental Stress Test: Temperature cycling (-40°C to +85°C) and humidity testing to ensure operation in all climatic conditions.

Vibration and Mechanical Shock Test: Simulate transportation and installation stresses, as well as ambient vibrations from nearby airport operations.

Electromagnetic Compatibility Test: Must fulfill CISPR 11/32 Class A or more stringent requirements, ensuring no interference with sensitive airport communication and navigation systems.

Endurance and Life Test: Continuous full-power and thermal cycling tests for thousands of hours to validate design margins and component lifespan.

2. Design Verification Example

Test data from a 150kW dual-port airport charging stack (800VDC Link, Ambient: 40°C):

Full-system peak efficiency (AC inlet to DC output) exceeded 96%.

PFC stage efficiency (utilizing VBMB18R09SE) remained above 98% at rated load.

Key Point Temperature Rise: VBP1601 case temperature stabilized at 92°C under continuous 100kW output per port; control board POL converter area (with VBGQA1810) showed a rise of <30°C above ambient.

The system passed 96-hour salt fog corrosion test, critical for coastal airports.

图3: 高端机场充电桩集群方案与适用功率器件型号分析推荐VBGQA1810与VBP1601与VBMB18R09SE产品应用拓扑图_en_03_dcdc

IV. Solution Scalability

1. Adjustments for Different Power Levels and Configurations

Fast Chargers for GSE (50-100kW): Can utilize scaled-down versions of the same topology, potentially using fewer parallel devices like the VBP1601.

Megawatt-Class Aircraft Charging Stations: Requires parallel connection of multiple VBP1601-type devices or transition to higher-current modules. The PFC stage may employ multiple VBMB18R09SE in interleaved bridges. Thermal management graduates to advanced liquid chilling systems.

Distributed Buffer Storage Integration: The core power devices are equally critical for bi-directional converters linking the grid, battery energy storage systems (BESS), and the charging ports.

2. Integration of Cutting-Edge Technologies

Wide Bandgap (SiC/GaN) Technology Roadmap:

Phase 1 (Current): High-performance silicon-based solution (as described), offering proven reliability and cost-effectiveness.

Phase 2 (Near-term): Introduce SiC MOSFETs (e.g., successors to VBMB18R09SE) in the PFC and high-voltage DC-DC stages. This can boost peak efficiency by 1-2%, allow higher switching frequencies, and reduce cooling system size.

Phase 3 (Future): Adopt full SiC/GaN solutions for the entire power chain, dramatically increasing power density and enabling ultra-fast charging with minimal footprint.

Grid-Interactive and Smart Charging: The robust power chain enables advanced features like vehicle-to-grid (V2G), peak shaving, and frequency regulation, turning charging piles into active grid assets. This requires enhanced control and communication atop the reliable hardware foundation.

Conclusion

The power chain design for high-end airport charging pile clusters is a systems engineering challenge balancing extreme power density, unwavering reliability, grid compliance, and lifecycle cost. The tiered selection strategy—employing high-voltage SJ MOSFETs for grid interface, ultra-low RDS(on) MOSFETs for high-current conversion, and high-density package MOSFETs for intelligent control—provides a scalable and robust foundation.

As airports evolve into smart energy hubs, the underlying power electronics must be inherently reliable, efficient, and adaptable. It is recommended that engineers adhere to the highest industrial and aviation-adjacent standards throughout design and validation, using this framework as a guide. Proactive preparation for wide-bandgap integration and smart grid functionalities is essential.

图4: 高端机场充电桩集群方案与适用功率器件型号分析推荐VBGQA1810与VBP1601与VBMB18R09SE产品应用拓扑图_en_04_thermal

Ultimately, the excellence of this power design is measured by its invisibility—seamlessly enabling rapid turnaround of electric vehicles and equipment, maximizing uptime, and providing resilient power services that are fundamental to the efficient and sustainable operation of modern airports.